Epson SC-P8500D Series User Manual page 135

SC-P8500D Series/SC-T7700D Series
Item
Advanced Paper Settings
Confirm ICC profile
Confirm Color Density
Paper Thickness
Platen Gap
Top Margin
Paper Suction
Paper Size Check
Auto Cut
Roll Core Diameter
Paper Eject Roller
Paper Feed Offset
Delete
Auto Cleaning
On
Standard
Custom
Nozzle Check Schedule
Nozzle Check Sensitivity
Nozzle Check Result
Notice
Off
Printing Language
USB
Network
User's Guide
Menu List
Setting/Additional Explanation
Displays the ICC profile name.
Displays the Color Density.
0.01 - 1.50 mm (0.4 - 59.1 mil) (0.01 mm units)
Auto, 1.2, 1.6, 1.9, 2.1, 2.4
Standard, 3mm, 15mm, 20mm, 45mm
Roll 1, Roll 2, Cut Sheet, Poster Board
-3 - +3
Thin or soft paper may not be fed correctly. If this occurs, reduce the setting.
On, Off
When this is set to On, the width of the loaded paper is automatically detected.
Follow Paper Source Settings, Never Cut
2inch, 3inch
Set the paper core size for the roll paper being loaded.
Auto, Use, Do Not Use
Roll 1, Roll 2, Cut Sheet, Poster Board
-1.0 - +1.50%
Deletes the registered custom paper setting.
Sets the timing that you want the printer to check the status of the nozzles, and if
clogged nozzles are detected, cleans the nozzles up to the set number of times. If
the nozzles are not clogged, cleaning is not performed.
Sets normal automatic cleaning.
You can set the timing and frequency for auto cleaning.
During Print, After Print
You can set the sensitivity of the nozzle check and the maximum number of
cleaning cycles.
On, Off
Turns off auto cleaning.
Auto, HP-GL/2, PS
Auto, HP-GL/2, PS
135