Start Printing From Roll With Least Amount; Roll 2 When Paper Runs Out - Epson SC-P8500D Series User Manual

SC-P8500D Series/SC-T7700D Series
B
Select Optimize Margins or Width Match.
Select Optimize Margins to print on the roll
paper with smaller margins.
Select Width Match to print on the roll paper
with the same paper width as the print job.
Note:
Select Disable to print regardless of the paper
width.
C
Display the Print screen on your computer, and
make sure roll paper is selected as the Paper
Size.
In this example, we will select A1.
D
Make sure that Auto is displayed for Roll
Switching.
If Auto is not displayed, click it and select Auto.
E
Make any other necessary settings, such as the
Print Quality, and then print.
Printing is performed on roll 2 (A0 width) roll
paper.
If you select A3 or A2 in step 3, printing is
performed on roll 1 (A2 width) roll paper.
Start Printing from Roll with
Least Amount Remaining, and
Switch Between Roll 1 and Roll
2 when Paper Runs Out
Load paper of the same paper type and the same paper
width into Roll 1 and Roll 2, and when the paper runs
out, the printer automatically switches the roll paper
to continue printing. Printing starts from the roll with
the least amount of paper remaining.
User's Guide
Various Printing Methods
Usage example
❏ When you want to prioritize the roll paper with
the least amount of paper remaining to finish off
the roll.
❏ When you want to continue printing without
interruption by automatically switching roll paper
to print a large amount of paper in an unattended
continuous operation.
Settings on Windows
A
B
C
D
90
Select General Settings - Printer Settings -
Paper Source Settings - Roll Paper Setup -
Roll Switching - Auto - Paper Length from
the printer's control panel.
Select Remaining Amount Priority.
Note:
❏ Selecting Data Length Priority to prevent
the roll paper from being switched during
printing. Make the remaining roll paper
management settings before printing.
"Paper Setting" on page 125
U
❏ Select Disable to print regardless of the
amount of paper remaining.
Load paper with the same paper type and the
same paper width into roll 1 and roll 2.
Display the printer driver's Printer Settings
screen, and then select Roll Auto as the Source.