Epson SC-P8500D Series User Manual page 171

SC-P8500D Series/SC-T7700D Series
(3) Hold the cleaning stick so that it is vertical,
and wipe the guides of all of the suction caps.
(4) If there is any fluff or dust in the caps,
remove it with the tip of the cleaning stick
or with tweezers.
User's Guide
Problem Solver
G
H
I
The paper is wrinkled.
o
o
171
Install the part shown in the illustration.
Close the printer cover.
Press OK on the control panel.
The print head returns to its original position.
Cleaning is performed automatically if the
print head is clogged.
Are you using the printer at normal room
temperature?
Epson special media should be used at normal room
temperature (temperature: 15 to 25°C, humidity: 40
to 60%). For information about paper such as thin
paper from other manufacturers that requires
special handling, see the documentation supplied
with the paper.
When using non-Epson special media, have
you made the paper configuration?
When using non-Epson special media, configure the
paper characteristics (custom paper) before printing.
"Before Printing on Commercially Available
U
Paper" on page 194