Caution: To avoid damaging the print head, do not use the media holding plates with media that is more than
0.02 inch (0.4 mm) thick. Move the media holding plates to the edges of the platen when they are not in use.
Close the front cover.
13.
Using the Auto Take-up Reel
Note that the auto take-up reel may not function as expected when you use ink layering on the
S50675/S70675.
Press the d button to feed the media down to the auto take-up reel core holder.
1.
Loosen the core holder screws and slide the core holders apart. Center the roll supports between the
2.
roll holders.
Using the Auto Take-up Reel
|
11