Page 3
Technical equipment and versions of the devices are in accordance with the legal prescriptions of the respective country of destination. Export to the European Union of the KBL products, listed in this guide, or operation of the systems in these countries, are not permitted. KBL does not accept any manufacturers liability in case this direction is not adhered to.
6.4 Service menu - Overview ......22 6.5 Service codes ..........23 6.6 Service menu - options ....... 23 α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
1. General information 1.1 About these instructions This manual is intended for use by This symbol indicates that damages • studio operator, may occur at the tanning device, at the • qualified, trained and authorized service techni- material or at the environment. cians.
1.4 Transport WARNING Overturning load Danger of being crushed by heavy parts of the equipment. • Keep the safety distance to the trans- port machine. • Do not walk under the load. • Wear safety shoes. 1.4.1 TRANSPORT BY FORKLIFT TRUCK During transport the tanning device may be damaged when using forklift forks that are too short.
2. Safety notes • Before carrying out any work, the tanning device 2.1 General safety notes must be disconnected from the mains voltage. • Follow all instructions given in this manual and all other documents enclosed with the tanning device. DANGER In addition, observe all relevant statutory provi- Live parts...
In particular, during installation the canopy must not be charged with additional loads. α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 10
Position of the secu- rity screw beneath the facing. α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 11
• Never lift the canopy without securing the sword brakets with the safety bolts safty bolts (kingpins) α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 12
• Make sure that the two canopy security screws are tightened (item 7)! ④ α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
0170 00) for the transmission of the audio signal. This connection must be made by qualified, trained and authorized service technicians. α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Do not let too much time pass between the individual keystrokes when entering a sequence of numbers! α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
In the following chapter, you will recognize CODE 2 protected menu items by the ser- vice menu. α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 24
A-OFF B-OFF Friday Switching cycle A Switching cycle B 08:30 12:00 14:30 22:00 α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 25
+/- buttons. fields pressing STORE! • Save settings by pressing STORE! α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 26
Specifies the start setting of the voice-guidance system (megaVoice). system. Factory setting: on Factory setting: on α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 27
(MP3 player, iPod, etc.). the “Music nonstop” function“. Factory setting: on Factory setting: MP3-internal α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 28
Sets the treble for studio music operation. Dynamic volume adaption on-/off. Factory setting: +14 dB Factory setting: on α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 29
(spraying time + spraying interval). Activates and deactivates the aroma function. Factory setting: 1 Factory setting: off α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 30
Factory setting: 3 α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 31
Not available in this system. • Save settings by Select input fields pressing STORE! (start / set) α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 32
SERVICE CODE Service Code Level 1 SUBMENU Service Code Level 2 BLUETOOTH Name Powerlevel α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 33
Submenu call with START/ENTER. Displays the first od, there is a 3 minute restart lockout. and the last Software-Upload. α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Page 34
Performs a restart of the electronics. Attention • All unsaved changes will be discarded! α α A s s e m b l y I n s t r u c t i o n s | KBL 4800 / 5600...
Need help?
Do you have a question about the 4800a and is the answer not in the manual?
Questions and answers