Configure With Operation As Part Of An Envirolog System - Valeport Hyperion Chlorophyll a Operating Manual

Hyperion Optical Sensors - Operating Manual:
MANUAL-1013637447-3 | issue: 1.6
Hover over the label with your mouse to see the pop-up information window on a particular field:
In the example below select a new Instrument Address and the field label and Tab title will be bold
to indicate the change.
Hover over the field you have just updated to see what the current setting is and what is set in the
instrument (Device):
Once you have made all your changes press
into the instrument
To set the instrument into a Run Mode select the
screen.

8.2.3 Configure with Operation as Part of an EnviroLog System

Page | 27
to upload the new configuration
button at the bottom of the
© 2022 – Valeport Ltd