Interface To The Hyperion - Valeport Hyperion Chlorophyll a Operating Manual

Hyperion Optical Sensors - Operating Manual:
MANUAL-1013637447-3 | issue: 1.6

8.2.1 Interface to the Hyperion

Open Connect and interface the Hyperion to a suitable comm port and power using the provided Y
lead.
Use the drop-down lists to select your port, baud rate and Instrument as required.
Click
8.2.1.1 Valeport Configure App Without an Instrument
If you do not have an instrument or would like to setup a configuration file to load into another
instrument in preparation for a future deployment, select the tick box on the opening dialogue –
Offline Mode:
This will give you access to all the configuration options and allow you to store a configuration
profile (*.vps) file for later upload to an instrument.
Once you have prepared the Configure App configuration use the File menu to store the
configuration profile
Page | 25
the button.
© 2022 – Valeport Ltd