Operation With 400 Series Instruments - Valeport Hyperion Chlorophyll a Operating Manual

Hyperion Optical Sensors - Operating Manual:
MANUAL-1013637447-3 | issue: 1.6

4 Operation with 400 Series Instruments

If the Hyperion Instrument is used with a 400 series Instrument e.g. MIDAS CTD+ it should be
configured using DataLog x2 software as follows:
Baud Rate: 38400 (#059 38400)
Mode: Continuous
•
The 400 series Instrument must be configured using DataLog Pro ver 04007125F1 or later
•
Ensure the 400 unit internal Power source (from 0400550) for the Hyperion is connected as
per cable form 0400C321.
•
Ensure the latest version of Hyperion interface code (04007181) is installed in the
Quartzonix Board (0400513)
Page | 17
© 2022 – Valeport Ltd