Table of Contents
Advertisement
Section 8 | Software
8.2.2 Configure the Instrument
The Information Tab will open. It contains read only fields that will display relevant information on
the interfaced instrument
Press the
button to interrogate the instrument to upload all the current settings.
You can follow the interrogation and replies from the instrument in the Terminal Window across the
bottom of the screen. If the terminal window is not visible, click on the down arrow to show it:
You may have to click and drag the window to show all data fields and the terminal window
The Terminal window can also be used to send specific # commands to the instrument should that
ENTER
be necessary. Type into the bottom line in the window and press
Click on the other Tabs to see relevant information and fine tune your set up, for example
Communication:
© 2022 – Valeport Ltd
Page | 26
Advertisement
Table of Contents
