Assembling; Mounting The Expiration Valve; Inserting The Expiration Valve - Dräger Medical Evita 2 dura Instructions For Use Manual

Care

Assembling

Assembling

Only use duly prepared components!

Mounting the expiration valve

The parts must be entirely dry to prevent malfunctioning.
Be careful to fit the diaphragm in the correct position.
Hold stopper by the flange and place diaphragm on
the collar of the stopper.
Insert stopper with diaphragm on top into the housing
from below and screw in tightly.
If the expiration valve has an additional water trap:
Fit collecting jar.

Inserting the expiration valve

Push the expiration valve into its connection until it
clicks into place. Check that it is blocked in position
by tugging lightly on the connector.
86