Hard Head 012650 Operating Instructions Manual page 15

Always face the stepladder
when using it.
Do not stand on the top two
steps of a stepladder without a
platform and handrail.
Do not stand on the top three
steps of a lean-to ladder.
Do not go on the 4 top steps
on a standing ladder with an
extension ladder above.
Make sure that the steps are
at the right angle.
Do not carry heavy items up
the stepladder.
Wear suitable footware.
Do not overreach.
Avoid work that involves
pressure to the side.
Pay attention to overhead
power lines when moving the
stepladder – risk of electric
shock.
Check that the surface under
the stepladder is free from
contamination.
Place the stepladder on a
stable surface.
Do not lean against a pole.
Locking devices shall be
checked and be fully secured
before use if not operated
automatically.
Check that the extension lock
is correctly connected.
The ladder is intended for
professional use.
The ladder is intended for
household use.
USE
• The stepladder must be put up in the
correct position, for example at the
correct angle if using as a lean-to ladder
(tilt angle 1:4) with the steps horizontal.
• Locks, if available, must be fully locked
before use.
• The stepladder must be placed on a
smooth, level and stable base.
• As a lean-to ladder it must lean against a
smooth, stable surface and be fastened
with a stable device before use.
• Never move the stepladder from above.
• When positioning the stepladder take into
consideration the risk of collision, e.g.
with pedestrians, vehicles or doors. Lock
doors (not emergency exits) and windows
in the work area, where possible.
• Identify potential risks in the work area,
such as high-tension cables or exposure to
EN
15