Troubleshooting - X-Tronic 3090-PRO-X Instructions Manual

ISSUE
Unit does not
have power
Soldering Iron
"Rattles"
S-E Error
Tip is not
heating up as
expected
Note: Normal temperature range for most soldering applications is
600°F ~ 650°F / 315°C ~ 343°C range. If you need to use a higher
temperature, please use it for the shortest possible time. Using
the soldering iron at exceedingly hot temperatures will shorten the
life of the heating element and soldering iron.

TROUBLESHOOTING

POSSIBLE SOLUTIONS
• Ensure the power cord is not damaged and in good
working condition.
• Ensure that the outlet is functional.
• This is expected behavior. The "rattle" is a small ball
that allows the unit to determine when the soldering
iron is not in use and it should go into Sleep Mode.
• The unit is no longer sensing the element - the
heating element may be cracked or worn out
and needs to be replaced. Replacements can be
purchased on our website: www.XTronicUSA.com.
• Ensure the soldering iron is not damaged and in
good working condition.
• The soldering tip could be oxidized, it is important to
always tin the tip and keep it clean. See Soldering
Tip Preparation on page 5.
• The heating element may need to be replaced.
Replacements can be purchased on our website:
www.XTronicUSA.com.