Troubleshooting - X-Tronic 9070-XR3 Instructions Manual

ISSUE
Unit does not
have power
S-E Error
Tip is not
heating up as
expected

TROUBLESHOOTING

POSSIBLE SOLUTIONS
• Ensure the power cord is securely attached to the
outlet and that the unit is powered on at the back
of the unit.
• Ensure that the outlet is functional.
• The soldering tip could be oxidized, it is important
to always tin your tip and keep it clean. See Tip
Maintenance section of manual.
• The heating element may need to be replaced
• The soldering tip could be oxidized, it is important
to always tin your tip and keep it clean. See Tip
Maintenance section of manual.
• The heating element may need to be replaced
• Unit may need to be calibrated - see Calibration
section of manual
- 11 -