Energy Saving Mode; Pre-Flush; Odor Extraction; 5. Basics Of Operation - DURAVIT SensoWash i Operating Instructions Manual

Energy saving mode

I.) Timed energy saving mode
Individual setting for energy saving mode. When the „Timed energy saving mode" is
activated, the seat heating is deactivated for the next 8 hours, then be automatically
reactivated for 16 hours. This procedure is repeated at the same time every day until
the „Timed energy saving mode" is deactivated.(Default setting: „Off")
II.) Auto energy saving mode
If all functions have been inactive and no human movement is detected for 48 hours,
the „auto energy saving mode" will active automatically. The seat heating is now
inactive. When any function is used or any human movement is detected, all previous
settings will automatically be reactivated.
Pre-flush
See chapter 4.3 „Flushing functions".

Odor extraction

Automatic odor extraction with long-lasting, maintenance-free catalytic filter.
The odor extraction is activated when the user is seated. It will be terminated automa-
tically when washing or warm air dryer functions are activated and will automatically
start again after using them. 60 seconds after the user has left the seat, the odor
extraction will stop automatically.
(Default setting: „On")
User profile
Personal preferences (Spray wand position, water spray intensity and temperature)
can be stored in different user profiles.

5. Basics of operation

SensoWash is operated via the remote control. Settings are altered via the remote
®
control as well.
If the remote control is not available or the batteries are empty then basic functions
can also be switched on or off from the side control buttons.
SensoWash automatically cleans the retracted spray wand when the seat sensor is
®
activated and also before and after washing functions are used.
EN
43