Care; Manual Cleaning Mode (Spray Wand And Nozzle) - DURAVIT SensoWash i Plus Operating Instructions Manual

Cleaning recommendations
Surface
Ceramic (daily
cleaning)
Ceramic (stub-
born dirt)
Spray wand and
EN
nozzle
Seat and lid
Covers and side
panels
Remote control
Table 4: Cleaning recommendations

7.2 Care

Manual cleaning mode (spray wand and nozzle)

Manual cleaning is only possible if the seat sensor is not activated.
> Activate manual cleaning mode via app to extract the spray wand for manual
cleaning.
26
Cleaning agent
acidic vinegar or
citrus based clea-
ning agent (pH 1-4)
stainless steel
cleaner, car polish
or a ceramic hob
cleaner
mild cleaning agent
(pH 7) without
hydrochloric acid
or chloride
mild cleaning agent
(pH 7) without
hydrochloric acid
or chloride
mild cleaning agent
(pH 7)without
hydrochloric acid
or chloride
water
Manual cleaning mode (spray wand and nozzle)
Equipment
cloth, sponge or
brush
cloth, sponge or
brush
> Clean the surface with
> Remove heavier soiling
cloth, sponge or
brush
soft, damp cloth
> Then wipe with a damp
soft, damp cloth
> Dry the surface.
soft, damp cloth
Cleaning
a soft damp cloth.
with warm water and
recommended cleaning
agent that you apply
to the cloth / sponge /
brush.
cloth to remove all
traces of the cleaning
agent.