Care; Manual Cleaning Mode (Spray Wand And Nozzle) - DURAVIT SensoWash i Plus Operating Instructions Manual

Cleaning recommendations
Surface
Ceramic (daily
cleaning)
Ceramic (stub-
born dirt)
Spray wand and
EN
nozzle
Seat and lid
Covers and side
panels
Remote control
Table 4: Cleaning recommendations

7.2 Care

Manual cleaning mode (spray wand and nozzle)

Manual cleaning is only possible if the seat sensor is not activated.
> Activate manual cleaning mode via app to extract the spray wand for manual clea-
ning.
24
Cleaning agent
acidic vinegar or
citrus based clea-
ning agent (pH 1-4)
stainless steel
cleaner, car polish
or a ceramic hob
cleaner
mild cleaning agent
(pH 7) without
hydrochloric acid
or chloride
mild cleaning agent
(pH 7) without
hydrochloric acid
or chloride
mild cleaning agent
(pH 7)without hy-
drochloric acid or
chloride
water
Manual cleaning mode (spray wand and nozzle)
Equipment
cloth, sponge or
brush
cloth, sponge or
brush
> Clean the surface with
> Remove heavier soiling
cloth, sponge or
brush
soft, damp cloth
> Then wipe with a damp
soft, damp cloth
> Dry the surface.
soft, damp cloth
Cleaning
a soft damp cloth.
with warm water and
recommended cleaning
agent that you apply
to the cloth/sponge/
brush.
cloth to remove all
traces of the cleaning
agent.