Table of Contents
Advertisement
5.2
Energy and water efficiency
To minimise the consumption of natural resources, the product has an instant heating
system and an auto-stop function for all shower functions. The following settings can
be adjusted to save energy in daily use:
5.2.1 Energy saving mode (seat heating)
Deactivates the seat heating for a specified period of time, e.g. during daytime, while
at work. When the function is activated, the seat heating is deactivated for 8 hours
and then automatically reactivated for 16 hours. This procedure is repeated at the
same time every day until the function is deactivated.
> Activate the energy saving mode via the remote control.
> Press and hold the stop button.
> Press the button seat heating to activate and deactivate the function.
5.2.2 Holiday mode
If the product is not to be used for two weeks or more, empty the product and switch
it off.
> Close the stop valve to interrupt the water supply.
> Activate the holiday mode via the remote control.
> Press and hold the stop button.
> Press and hold Comfortwash - on the remote control until a confirmation tone
sounds.
> Release the buttons.
A confirmation tone sounds. The product is drained. The power button flashes green
during the procedure.
> Disconnect the power supply.
> Remove the batteries from the remote control.
43
Advertisement
Table of Contents
