Page 1
Verona End Table Assembly Instructions - 609/5026 Please keep for future reference 610/6726 Dimensions Width - 40cm Depth - 40cm Height - 41cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 issue 1 4/23/10...
Page 2
Safety and Care Advice Important - Please read these instructions fully before starting assembly Check you have all the Do not stand on the panels, this We do not components and tools listed on could cause damage. recommend the use pages 2 and 3.
Page 3
Components - Panels If you have damaged or missing components, call the Customer Helpline:08456 400800 Please check you have all the panels listed below Leg x 4 (37.1 x Ø3.5cm) Foot x 4 (4.7 x 3.4cm) Ø Table top (40 x 40cm) Shelf (30 x 30cm) Components - Fittings...
Page 4
Assembly Instructions Step 1 Step 1 Fitting the legs Unscrew Cap screws a from the Feet Use Legs to fix the Feet onto the Shelf Use Cap screws fix the Top panel onto the unit.
Page 5
Assembly Instructions Step 2 Finishing the unit Finally place the unit in the desired location. Note: Before use always make sure the unit is secure. Assembly is complete. If you need help or have damaged or missing parts, call the Customer Helpline : 08456 400800...
Page 6
Components Verona Beech / Silver End Table 1 x Table Top Simple Assembly Instructions Please keep for future reference 1 x Shelf 4 x Foot 4 x Leg IMPORTANT 3. Take all the fittings out of the plastic bag 1. Read these instructions carefully and and separate them into their groups.
Page 7
Assembly Instructions Assembly Instructions Stage 1 – Stage 2 – Fitting the Legs Finishing the Unit 1. Unscrew Cap Screws from the Feet D . fig. 1 See fig. 1. 1. Finally place the unit in the desired location. See fig. 3. 2.
Need help?
Do you have a question about the Verona 609/5026 and is the answer not in the manual?
Questions and answers