Page 1
2 Drawers/Tall/Wide/Extra Deep Bookcase Simple Assembly Instructions Please keep for future reference IMPORTANT 1 . Read these instructions carefully and 3 . Take all the fittings out of the plastic bag and separate them into their groups. familiarise yourself with the procedure before assembling the unit.
Page 2
Components Components 1 x Top Panel 3 x Shelf Side View 1 x Top Back Panel S 2 x Drawer Front Panel 1 x Middle Support T 2 x Drawer Back Panel 1 x Bottom Panel 1 x Back Support 1 x Middle Back Panel Drawer Right Drawer Left...
Page 3
Assembly Instructions Assembly Instructions Stage 1 – Stage 2 – Fitting the Tracks Fitting the Top Panel Check Before Assembly CAUTION: Always check the assembly method is correct There are many different before applying Glue. fig. 1 kinds of Screws and NOTE: It would be useful to ask Panels.
Page 4
Assembly Instructions Assembly Instructions Stage 3 – Stage 4 – Fitting the Bottom Panel Fitting the Side Panels CAUTION: Always check the assembly method is correct CAUTION: Always check before applying Glue. the assembly method is correct before applying Glue. NOTE: It would be useful to ask someone to help you at this fig.
Page 5
Assembly Instructions Assembly Instructions Stage 5 – Stage 6 – Fitting the Back Panels Fitting the Shelf Supports NOTE: It would be useful to ask fig. 11 1. Slide Support Covers K onto someone to help you at this Shelf Supports L . stage.
Page 6
Assembly Instructions Assembly Instructions Stage 7 – Stage 8 – Fitting the Shelves Fitting the Drawers CAUTION: Always check NOTE: It would be useful to ask the assembly method is correct someone to help you at this before applying Glue. stage.
Assembly Instructions Assembly Instructions Stage 8 – Stage 9 – Fitting the Drawers Finishing the Unit IMPORTANT: When drilling into walls always check that there are no hidden wires or pipes etc. fig. 20 fig. 19 Make sure that the screws and 4.
Page 8
A Guide to A Guide to Wall Mounting & Fixings Wall Mounting & Fixings IMPORTANT: No.3 "Shield Anchor" Wall Plug No.5 "Cavity Fixing - Heavy Duty" When drilling into walls always check Heavy Loads Wall Plug that there are no hidden wires or pipes etc.
Page 9
2 Drawers/Tall/Wide/Extra Deep Bookcase 609/2555 Assembly Instructions - Please keep for future reference 609/3578 609/4694 609/5765 Dimensions Width - 78cm Depth - 29cm Height - 180cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800...
Page 10
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the • Do not stand on the product, • We do not components and tools listed on this could cause damage. recommend the pages 2 and 3.
Page 11
Components - Panels If you have damaged or missing components, call the Customer Helpline: 08456 400800 Please check you have all the panels listed below Drawer front panel x 2 (74.4 x 17cm) Fixed panel x 2 (74.9 x 28.4cm) Drawer back panel x 2 (71.7 x 10.6cm) Top back panel...
Components - Fittings Note: The quantities below are the correct amount to complete the assembly. in some cases mor may be supplied than are required. Plastic support x 4 14mm Screw x 9 30mm Screw x 12 50mm Screw x 12 Support cover x 12 Shelf support x 12 30mm Dowel x 18...
Page 13
Assembly Instructions Step 1 Middle hole Attaching runners Position the Runners in from front edge of the Right side panel 1.7cm Slide top of the Runners back. Runners on the Right side panel Note: The front part of the Runner should be approximately 1.7 cm from the front edge of the panel.
Page 14
Assembly Instructions Step 1- continued Middle hole Attaching runners Position the Runners in from front edge of the Left side panel Slide top of the runners back. Runners on the Left side panel Finished front edge Slide top of the Runners forward.
Page 15
Assembly Instructions Step 2 Attaching bottom panel Use Plastic Supports Front panel onto the Bottom panel back edge Insert Dowels into into the Bottom panel Step 3 Attaching side panels Insert Dowels into the Back support Insert Dowels into the Fixed panels Insert Dowels into the Middle panel...
Page 16
Assembly Instructions Step 3 - continued Unfnished Caution: Always check the assembly method is correct before applying glue. Place a small amount of Glue onto the joint’s Left side panel Right side panel onto the Fixed panels Middle panel , Bottom panel , Back support Step 4...
Page 17
Assembly Instructions Step 5 Attaching shelf panels With help, carefully stand bookcase upright. Warning: The bookcase is heavy. Lift with care. SIide Support covers onto Shelf supports lnsert Shelf supports (Support covers included) into the unit. before inserting the Shelves. Note: Set the shelf supports to the desired height.
Page 18
Assembly Instructions Step 6 Dawer assembly Fix Drawer right and left side panels & to Drawer back panel using Screws Place a small amount of Glue into the groove on the Drawer side panels and Drawer bottom panel. Carefully slide the Drawer bottom panel into the Finished...
Page 19
Assembly Instructions Step 7 Inserting drawers Slide the assembled drawers fully onto the runners so the runners butt up against the back of the drawer front. From inside each drawer sides into the runners using Screws...
Page 20
Assembly Instructions Step 8 Note: Wall plugs supplied are for solid wall only. Fixing to wall wall be used for your wall, seek It is recommended that the professional advice if in doubt wall. strap onto the top panel. Top panel With help, move bookcase into position.
A Guide to - Wall Mounting & Fixings Important: When drilling into walls always Important note: check that there are no hidden wires or pipes etc. If plastic wall plugs Make sure that the screws and wall plugs being used are supplied with your are suitable for supporting your unit.
Need help?
Do you have a question about the 609/2555 and is the answer not in the manual?
Questions and answers