Page 1
Anderson - TV Unit Assembly Instructions - 609/5521 Please keep for future reference 609/5514 Dimensions Width - 100cm Depth - 39.5cm MADE IN Height - 51.7cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 2 - 13/06/12...
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 24kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 3
If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Left Side Right Side Divider Shelf (D1499A) (D1500A) (D1502A) (D1506A) (495 x 375mm) (495 x 375mm) (419.5 x 370mm)
Page 4
If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 5
If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the drawer fronts Screw 2 metal dowels into the holes shown on the back of the drawer front Note: Tighten metal dowels up fully against...
Page 6
Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
Page 7
Assembly Instructions Step 7 Runners must be pushed up against Fit runners to the the drawer front drawers Turn the drawer assemblies over. Fit the runner to the bottom edge of the left drawer side , as shown, making sure that it is pushed up against the back of the drawer front...
Page 8
Assembly Instructions Step 9 Finish preparing the left side Finished front edge Tap a wooden dowel into the left side Note: Wooden dowels must not stick out from the edge by more than 10mm or they may 10mm damage other panels. Screw 3 metal dowels into the left side Insert a large locking...
Page 9
Assembly Instructions Step 11 Prepare the base Insert 4 large locking nuts into the base Finished front edge Step 12 Join the right side and base Push the base onto the right side Use a screwdriver to tighten the 2 large locking nuts fitted to p l a...
Page 10
Assembly Instructions Step 14 Fit the divider Attach the divider the base using 2 screws Finished front edge Step 15 Prepare the plinth Tap 2 wooden dowels into the plinth Insert 2 large locking nuts into the plinth Step 16 Fit the plinth Push the plinth onto...
Page 11
Assembly Instructions Step 17 Fit the left side Push the left side onto the assembly. Use a screwdriver to tighten the 3 large locking nuts fitted to the base and the plinth Step 18 Prepare the top Screw 3 metal dowels into the top Profiled front edge...
Page 12
Assembly Instructions Step 20 The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Fit the back Square up the unit by This gap is for making sure that cable management measurement x to x...
Page 13
Lift with care. Side panel Drawer If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW...
Page 17
Anderson - TV Unit Assembly Instructions - 609/5521 Please keep for future reference 609/5514 Dimensions Width - 100cm Depth - 39.5cm MADE IN Height - 51.7cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 3 - 05/04/13...
Page 18
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 24kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 19
If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Left Side Right Side Divider Shelf (D2273A) (D2274A) (D2276A) (D2279A) (495 x 375mm) (495 x 375mm) (419.5 x 373mm)
Page 20
If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 21
If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the drawer fronts Screw 2 metal dowels into the holes shown on the back of the drawer front Note: Tighten metal dowels up fully against...
Page 22
Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
Page 23
Assembly Instructions Step 7 Runners must be pushed up against Fit runners to the the drawer front drawers Turn the drawer assemblies over. Fit the runner to the bottom edge of the left drawer side , as shown, making sure that it is pushed up against the back of the drawer front...
Page 24
Assembly Instructions Step 9 Finish preparing the left side Finished front edge Tap a wooden dowel into the left side Note: Wooden dowels must not stick out from the edge by more than 10mm or they may 10mm damage other panels. Screw 3 metal dowels into the left side Insert a large locking...
Page 25
Assembly Instructions Step 11 Prepare the base Insert 4 large locking nuts into the base Finished front edge Step 12 Join the right side and base Push the base onto the right side Use a screwdriver to tighten the 2 large locking nuts fitted to p l a...
Page 26
Assembly Instructions Step 14 Fit the divider Attach the divider the base using 2 screws Finished front edge Step 15 Prepare the plinth Tap 2 wooden dowels into the plinth Insert 2 large locking nuts into the plinth Step 16 Fit the plinth Push the plinth onto...
Page 27
Assembly Instructions Step 17 Fit the left side Push the left side onto the assembly. Use a screwdriver to tighten the 3 large locking nuts fitted to the base and the plinth Step 18 Prepare the top Screw 3 metal dowels into the top Profiled front edge...
Page 28
Assembly Instructions Step 20 The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Fit the back Square up the unit by This gap is for making sure that cable management measurement x to x...
Page 29
Lift with care. Side panel Drawer If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW...
Need help?
Do you have a question about the Anderson 609/5521 and is the answer not in the manual?
Questions and answers