Light Box - Welch Allyn 48700 Operating Instructions Manual

Light Box

Note: The Light Box should not be sterilized or immersed.
1. Prior to cleaning, turn power off and disconnect the power cord
from both the wall outlet and the Light Box.
2. The external surfaces may be cleaned by wiping with a cloth
dampened with mild soap and water or by using the following
cleaning/disinfecting solutions. DO NOT IMMERSE.
• 70% Isopropyl Alcohol
• 10% mild bleach solution
• 10% Iodine Based Solution
3. The power cord may be wiped clean using the same cleaning/
disinfecting solutions listed above. Wipe dry with a clean cloth.
Care must be taken not to get the prongs wet. DO NOT
IMMERSE.
4. Do not plug the unit into a wall outlet until it is thoroughly dry.
18