FUSE REPLACEMENT
1. Turn the unit off and remove the power cord from both the wall
outlet and the light box.
2. Press the tabs on both ends of the fuse drawer in and pull the
fuse drawer out. ! ! ! !
3. Remove and replace new fuses of the same type. There is no
required orientation of the fuses. Be sure to replace both
fuses." " " "
4. Reinsert the fuse holder by pressing it into the power
connector until it snaps into place.
5. If the new fuses blow, immediately contact Welch Allyn
Technical Service (315-685-4560).
16
! ! ! !
Fuse Tabs
" " " "