Reference; Error Messages - Casio MZ-X300 User Manual

Reference

Error Messages

One of the error messages below appears on the display when a problem occurs.
• To clear an error message and return to the normal display, touch bo EXIT on the display.
Display Message
1. The USB flash drive is not connected to the
No Media
Digital Keyboard's USB flash drive port.
2. The USB flash drive was removed while some
operation was in progress.
3. The USB flash drive is write-protected.
4. The USB flash drive has anti-virus software.
No File There is no loadable file or no playable file in the
"MUSICDAT" folder.
No Data You are attempting to save user data (user preset,
user rhythm, MIDI data, etc.) when there is no data
to save.
Read Only A read-only file with the same name you are trying
to use is already stored on USB flash drive.
Media Full There is not enough space available on the USB flash
drive.
Too Many Files 1. There are too many files on the USB flash drive.
2. There is a file named TAKE99.WAV in the
"MUSICDAT" folder.
Not SMF01 You are attempting to play back SMF Format 2 song
data.
Size Over 1. The MIDI recording data on the USB flash drive
cannot be played because it is too big.
2. The SMF file on the USB flash drive cannot be
played because it is too big.
3. The data you are trying to import cannot be
imported because it is too big.
Wrong Data 1. The USB flash drive data is corrupted.
2. USB flash drive contains data that is not
supported by this Digital Keyboard.
Memory Full 1. There is not enough Digital Keyboard memory
available to convert a MIDI recorder song to SMF
data and store it on the USB flash drive.
2. There is not enough memory remaining for
pattern sequencer operation.
3. Remaining memory became too low during
music preset editing.
Format Error 1. The USB flash drive format is not compatible
with this Digital Keyboard.
2. The USB flash drive is corrupted.
Media Error The USB flash drive is corrupted.
Cause Action
1. Correctly plug the USB flash drive into the USB
flash drive port.
2. Do not remove the USB flash drive while any
operation is in progress.
3. Unprotect the USB flash drive.
4. Use a USB flash drive that does not have anti-
virus software.
Move the file you want to load or play into the
appropriate location (pages EN-63, EN-64) in the
"MUSICDAT" folder.
Select a user data item for which there is data to
save.
• Change the name and then save the new data.
• Remove the read-only attribute from the existing
USB flash drive file and overwrite it with the new
data.
• Use a different USB flash drive.
Delete some of the files on the USB flash drive to
make room for new data (page EN-64) or use a
different USB flash drive.
1. Delete some of the files on the USB flash drive to
make room for new data.
2. Delete the WAV file in the "MUSICDAT" folder.
This Digital Keyboard supports playback of SMF
Format 0 or Format 1 only.
1. The Digital Keyboard supports playback of MIDI
recording data up to approximately 700KB.
2. The Digital Keyboard supports playback of SMF
files up to 320 KB.
3. The Digital Keyboard supports import of data
(per item) up to the maximum sizes shown
below.
User Rhythms: Approximately 64 KB
User Presets: Approximately 6 KB
—
1. Reduce the size of the song data.
Example:
Delete any tracks that are not required.
2. The maximum allowable size of data that can be
written by the pattern sequencer (per user
rhythm) is approximately 64 KB.
3. The Digital Keyboard supports input of
approximately 1,000 chords.
1. Format the USB flash drive on the Digital
Keyboard.
2. Use a different USB flash drive.
Use a different USB flash drive.
EN-67