After Care; Warranty - Takuma profoil User Manual

8.

AFTER CARE

It is important to rinse your foil after every session to prevent corrosion. If you
ride daily, you may not want to disassemble it after each session however
we recommend that you take your foil apart at least once a week and dry it
thoroughly before packing it away. When unscrewing the screws remember
to put them back in position in order to avoid losing them.
MAKE SURE to apply a layer of Tef Gel on each screw every time you use it. Tef
Gel is a saltwater-proof lubricant that acts as a sealant to prevent corrosion
of stainless screws in aluminium.
Regularly check and maintain your equipment, make sure there are no holes
or significant scratches in your board or foil. Always make sure your screws
are closed tightly before each use, a foil without a board attached will sink
in water.
16 36
/
9.

WARRANTY

All TAKUMA products are met with strenuous quality control. With the correct
after-care our products should last you a long time. However, in the case of
a rare manufacturing defect we have a team dedicated to giving after-sales
support and product advice to provide our customers with the best solutions.
TERMS
All our products are supplied with a 2-year guarantee that covers any
manufacturing defect which prevents the correct use of this product. It does
not protect against damage caused by any modifications, collisions, external
environment or improper use by the customer.
ANY QUESTIONS?
Contact our team
17 36
/
EN