Board Mount - Takuma profoil User Manual

6.

BOARD MOUNT

Innovative Top Plate Design
The top plate is uniquely designed for quick and easy installation. It enables you to
maintain the same position each time you reattach the foil.
STEP 1
For first time use
Place your board on a clean surface with the hull facing up. Make sure the nose and tail
are protected.
Insert loosely the 4 x M25mm screws into the 4 x M6-T Nuts. Place two into each of the foil
box rails with the flat edge facing down.
M6-T Nuts
M6 25mm
12 36
/
Place the Top Plate and foil on top, position it towards the front of the box and align the
T-Nuts with the inner top plate holes.
Once the top plate is in place, shift the screws individually to the outer holes and firmly
tighten the screws in a diagonal sequence.
13 36
/
EN