Page 4
LOL PROFOIL FULL CARBON STEP 1 This pack includes Mount the foil · 1 mast : To assemble your foil’s wing prepare the three front wing’s 75cm (29.5”) full carbon screws (Torx M6-18mm) and the two back wing’s screws · 1 lol front wing (Torx M6-18mm for the front screw and Torx M6-14mm ·...
Page 5
STEP 2 STEP 3 Front wing Stabilizer Drag the front wing on the fuselage’s flare, keep Place the stabilizer with the winglets in the opposite the winglets up on the fuselage’s notch side direction of the front wing and fix it with the two (toward the top).
Page 6
STEP 4 RESULT Assembly Place the top plate of the carbon mast with the 4 screws (Allen M6-300mm). Make sure to screw them in diagonal and make sure your mast is straight in foil boxes. No need to tight the screws too much (It can damage your foil boxes or your boards).
Page 8
LOL PROFOIL ALU & CARBON STEP 1 Mount the foil This pack includes · 1 mast : To assemble your foil’s wing prepare the three front wing’s 70cm (27.5”) anodized aluminum screws (Torx M6-18mm) and the two back wing’s screws ·...
Page 9
STEP 2 STEP 3 Front wing Stabilizer Drag the front wing on the fuselage’s flare, Place the shimm between the fuselage and the stabilizer. keep the winglets up on the pole’s notch side. Place the stabilizer with the winglets in the opposite Apply tef gel on the screws before placing direction of the front wing and fix it with the two them on matching holes and fix the front wing...
Page 10
STEP 4 STEP 5 Mast Assembly Place the top plate on the mast and Place the mast in the fuselage, fix with 3 screws fix with 3 screws (Torx M6-30mm). (Torx M6-30mm). You are now ready to ride...
Page 12
WARNING Caring to ride longer It is important to rinse your foil after each session. You maybe don’t want to disassemble it after each session; if you ride everyday at least do it once a week and dry it well before packing it into the carry bag.
Page 13
For further information, or to order your e-foil: contact@takuma.fr or on the website : takuma.fr...