Positioning Tips - Takuma profoil User Manual

STEP 2
Removing the Top Plate
Using the Torx key untighten the screws one at a time, re-position them from the outer
holes to the inner plate holes , loosely tighten each screw before untightening the next.
When all 4 screws are positioned in the inner holes, you can lift off the foil.
Quick positioning feature
With the screws already inserted in the board, place the top plate and foil directly on top
so that all 4 screws are positioned in the inner plate holes.
Using the Torx key untighten the screws one at a time and re-position them into the
outer top plate holes, loosely tighten each screw before untightening the next. When all
4 screws are in place you can then close them tightly following a diagonal sequence.
14 36
/
7.

POSITIONING TIPS

The Profoil is designed to be positioned towards the front of your foil box for an optimum
setting (see option 1).
If you experience too much lift, we recommend moving the foil more towards the middle
(see option 2) or further back (see option 3).
If the nose dives, then you should position the Profoil more towards the front.
We recommend that you adjust the foil's positioning as needed to suit the conditions
and your riding style.
15 36
/
EN