Assembly - Takuma profoil User Manual

5.

ASSEMBLY

STEP 1
Front Wing
Unscrew the M6-18mm screws from the bottom of the fuselage and then carefully
mount the front wing.
1
Apply a thin layer of Tef Gel on the M6-18mm screws before inserting them and then
close tightly using the torx key.
2
x3
M6 18mm
8 36
/
STEP 2
Back Wing
Unscrew the M6-14mm screws from the bottom of the fuselage and then carefully
attach the back wing.
x2
M6 14 mm
Apply a thin layer of Tef Gel on the M6-14mm screws before inserting them and then
close tightly using the torx key.
For the perfect back wing angle when used with a 1300cm2 or 1600cm2 front wing we
recommend using a shim, this comes pre-installed on the fuselage. Note: No shim is
needed for set up with the 1900 cm2 front wing.
9 36
/
EN