Table of Contents
Advertisement
4.
ASSEMBLY
To facilitate the assembly of the TAKUMA E-FOIL JET, we recommend
watching the tutorials on our channel
Assemble your TAKUMA E-FOIL JET in a clean and dry place.
Only use the Jet ESC for the Jet propulsion. Using the regular non Jet
ESC will cause irreversible damage to the Jet propulsion.
Apply TEF GEL on all screws to avoid corrosion.
4.1 Jet ESC Installation
4.1
Jet ESC Installation
http://youtube.takuma.com
M8-16mm
16
38
/
4.2 Jet ESC Antenna Installation
4.2
Jet ESC Antenna Installation
Efoil Cruising Jet
Clean area with alcohol and allow to dry before attaching clips.
Press antenna cable firmly onto the clips. Place antenna near the
top without obstructing the lid from closing.
Efoil Carver Jet
Press antenna cable firmly onto the clips. When attaching EVA strip
be sure to clean the area with alcohol and allow to dry first. Wait at
least 12 hours before going in the water.
17
38
/
EN
x3
Cable clip
Advertisement
Table of Contents
