Display And Messages - Jeep GRAND CHEROKEE 2022 Owner's Manual

100 GETTING TO KNOW YOUR INSTRUMENT PANEL
Unless reset, this message will continue to display each
time the ignition is placed in the ON/RUN position. To
turn off the message temporarily, push and release the
OK or arrow buttons. To reset the oil change indicator
system (after performing the scheduled maintenance),
refer to the following procedure.
Vehicles Equipped With Keyless Enter 'n Go™
Ignition
Use the steering wheel instrument cluster display
controls for the following procedure(s):
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not start
the engine).
2. Push and release the down
scroll downward through the main menu to
"Vehicle Info."
3. Push and release the right
access the "Oil Life" screen.
4. Push and hold the OK button to reset oil life.
If conditions are met, the gauge and numeric
display will update to show 100%. If conditions
are not met a pop-up message of "To reset oil
life engine must be off with ignition in run" will
be displayed (for five seconds), and the user
will remain at the Oil Life screen.
5. Push and release the up or down
button to exit the submenu screen.
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not start
the engine).
2. Fully press the accelerator pedal, slowly, three
times within 10 seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return the
ignition to the OFF position.
arrow button to
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
arrow button to
reset. If necessary, repeat this procedure.
D A
ISPLAY
The instrument cluster display is located in the
center portion of the cluster and consist of multiple
sections:
Main Screen — The background of the display

will illuminate in black under normal conditions,
yellow for non critical warnings and red for crit-
ical warnings
arrow
M
ND ESSAGES
Submenu Dots — Whenever there are

submenus available, the position within the
submenus is shown here
Reconfigurable Telltales/Information

Gear Selector Status (PRND)

Driver Interactive Display (Compass, Temp,

Range to Empty, Trip A, Trip B, Average Fuel
Economy, Current Fuel Economy and Time)
Air Suspension Status — If Equipped

Four Wheel Drive (4WD) Status — If Equipped

The instrument cluster display will normally display
the main menu or the screens of a selected feature
of the main menu. The main display area also
displays pop-up messages that consist of possible
warning or information messages. These pop-up
messages fall into several categories:
Five Second Stored Messages

When the appropriate conditions occur, this
type of message takes control of the main
display area for five seconds and then returns to
the previous screen. Most of the messages of
this type are then stored (as long as the condi-
tion that activated it remains active) and can be
reviewed from the "Messages" main menu item.
Examples of this message type are "Right Front
Turn Signal Lamp Out" and "Low Tire Pressure."