Enabling And Disabling The Parksense Active Park Assist System - Jeep GRAND CHEROKEE 2022 Owner's Manual

168 STARTING AND OPERATING
NOTE:
The driver is always responsible for controlling

the vehicle, responsible for any surrounding
objects, and must intervene as required.
The system is designed to assist the driver and

not to substitute the driver.
During a semi-automatic maneuver, if the driver

touches the steering wheel after being instructed
to remove their hands from the steering wheel,
the system will cancel, and the driver will be
required to manually complete the parking
maneuver.
The system may not work in all conditions

(e.g. environmental conditions such as heavy
rain, snow, etc., or if searching for a parking
space that has surfaces that will absorb the
ultrasonic sensor waves).
New vehicles from the dealership must have at

least 30 miles (48 km) accumulated before the
ParkSense Active Park Assist system is fully cali-
brated and performs accurately. This is due to the
system's dynamic vehicle calibration to improve
the performance of the feature. The system will
also continuously perform the dynamic vehicle
calibration to account for differences such as
over or under inflated tires and new tires.
E A D
NABLING ND ISABLING
P S A P
ARK ENSE CTIVE ARK
S
YSTEM
The ParkSense Active Park Assist system
can be enabled and disabled with the
ParkSense Active Park Assist switch,
located on the switch panel above the
Uconnect display.
To enable or disable the ParkSense Active Park
Assist system, push the ParkSense Active Park
Assist switch once (LED turns on). Pushing the
switch a second time will disable the system
(LED turns off).
The ParkSense Active Park Assist system will turn off
automatically for any of the following conditions:
Parking maneuver is completed

Vehicle speed is greater than 18 mph (30 km/h)

when searching for a parking space
Vehicle speed is greater than 5 mph (7 km/h)

during active steering guidance into the parking
space
Steering wheel is touched during active steering

guidance into the parking space
ParkSense Front and Rear Park Assist switch is

pushed
T
Driver's door is opened
HE 
A Rear liftgate is opened
SSIST 
Electronic Stability Control/Anti-Lock Braking

System intervention
The ParkSense Active Park Assist system allows a
maximum number of shifts between DRIVE and
REVERSE. If the maneuver cannot be completed
within the maximum amount of shifts, the system
will cancel and the instrument cluster display will
instruct the driver to complete the maneuver
manually.
The ParkSense Active Park Assist system will only
operate and search for a parking space when the
following conditions are present:
Gear selector is in DRIVE

Ignition is in the RUN position

ParkSense Active Park Assist switch is activated

Driver's door is closed

Rear liftgate is closed

Vehicle speed is less than 15 mph (25 km/h)

Vehicle speed is less than 25 km/h

The outer surface and the underside of the front

and rear fascias/bumpers are clean and clear
of snow, ice, mud, dirt or other obstruction