Adj Rfc Operation - ADJ WIFLY EXR HEX5 IP User Manual

ADJ RFC OPERATION

The ADJ RFC remote (sold seperately) has many different functions and allows you to control your
WiFly EXR HEX5 IP from long distance. Maximum range is 150 ft. To use the RFC you must first acti-
vate the fixtures receiver, as directed in the Operating Instructions section of this manual.
BLACKOUT - Pressing this button will blackout the fixture. Press and hold this button for 3 seconds
to return to default settings.
AUTO RUN - Pressing this button will cycle through auto run, color change mode, and color fade
mode. In the color change and color fade modes, you can use the "+" and "-" buttons to scroll
through the different programs. You can control the speed of each of the modes by pressing the
SPEED button and using the "+" and "-" buttons.
PROGRAM SELECTION - Pressing this button will switch between static color mode and second-
ary mode. Use the "+" or "-" to scroll through the 63 static colors. Once you have found the desired
color, you can press the FLASH button to activate strobing and use the "+" or "-" to adjust the flash
rate.
FLASH - This button will activate the flash (strobe) effect. You can control the flash speed using the
"+" and "-" buttons.
SPEED - Press this button and use the "+" and "-" buttons to adjust the speed in Program mode.
SOUND ACTIVE - This button has no active function with this fixture.
R G B W/A - Press either one of these buttons and use the "+" or "-" to adjust the brightness. Press
the FLASH button to activate strobing and use the "+" or "-" buttons to adjust the Flash rate. Note:
Use the W/A button to choose white, amber, & UV. Each press of this button will change to the next
color.
"+" and "-" - Use these buttons to adjust the flash rate, select your desired program, adjust the
color change speed, color fade speed, auto run speed, RGBWA & UV brightness, and to scroll
through the Static colors.
19