Rf1100T" Configuration Card - Siemens SIMATIC Ident RF1000 Configuration Manual

"RF1100T" configuration card

You can use the "RF1100T" configuration card (6GT2300-0CC00-0AX0) to transfer reader
configurations (e.g. memory areas, addresses, passwords, write permissions, etc.) and
"Autoread" configurations to the RF1000 reader. A configuration with several functions can
be transferred from the configuration card to the reader.
The following options are available for changing the configuration of a reader using a
configuration card:
• Programming using the "vhl_select()" function
When programming in the application, you need to set the "AllowConfig = true" tag when
calling the function "vhl_select()" and then hold the configuration card in the antenna
field of the reader. After you have changed the configuration, the reader automatically
restarts. After the restart, you need to set the "AllowConfig" parameter back to "false".
• Using the demo application ("AccessControlDemo.exe")
To do so, select the "Configcard" check box and click the "Start" button while the
configuration card is in the antenna field of the reader.
• Automatically with enabled "Autoread" mode
With the RF1070R reader, the "Autoread" mode is switched on in the factory as of product
version AS:F. In the delivery state of the reader, hold the configuration card in front of the
reader after switching on the power.
An existing configuration in which "Autoread" mode is still active can only be replaced by a
configuration with the same Config Security Code and Customer Key Signature. This prevents
accidental overwriting. Note that working with the "vhl_select()" command ("AllowConfig =
false") or transferring a VHL configuration switches off "Autoread" mode. In this case, the
configuration card can only be read in again using the demo application and the "vhl_select()"
function (with "AllowConfig = true") or after the reader is reset to factory settings
("syscmd_reset").
The rewritable configuration cards are supplied in packs of five. Two of the supplied cards are
unwritten, while three cards are written with sample configurations. You can find detailed
information on this in the section "Appendix A (Page 35)". You can also order configuration
cards with preset, customer-specific configurations. To do this, please contact Service &
Support (Page 37).
SIMATIC RF1000
Configuration Manual, 07/2021, C79000-G8976-C647-01
6
31