INTEGRA Metering AMTRON S3 Installation And Operating Instructions Manual page 17

Level 2 / Technician's Loop:
1) Current power in kW
5) Temperature difference
in K.
(Cooling energy: Value is
displayed negative.)
9) Firmware version
Level 3 / Statistics Loop:
Level 4 / Maximum Values Loop:
1) Maximum power
alternating with date
and time
Page 17 of 37 Article no.: 1080621015
2) Current flow in m³/h.
(When negative flow,
value is displayed
negative.)
6) Before start of
operation:
days since manufacture
After start of operation:
days since manufacture
alternating with
days of operation after
reaching an energy value >
10 kWh
2) Maximum flow
alternating with date
and time
2022_01_18
3) Inlet flow temperature
in °C
7) M-bus address
1) – 30) Semimonthly
values:
date alternating with
heat energy,
cooling energy,
volume,
value tariff register 1,
1)
value tariff register 2.
(If the meter has 3 pulse
inputs, their values
2)
follow. )
3) Maximum inlet flow
temperature
alternating with date
and time
Subject to technical change! Errors excepted.
4) Outlet flow
temperature in °C
8) Serial number
4) Maximum outlet flow
temperature
alternating with date
and time