INTEGRA Metering AMTRON S3 Installation And Operating Instructions Manual page 16

Level 1 / Main Loop:
1) Total heat energy
since start of operation
(standard display);
alternating display:
cooling energy (for
heat/cooling meter);
when negative flow;
information message (if an
error was detected)
5) Current date
alternating with
time
9) Pulse counter 1:
pulse value
alternating with
2)
reading
1) Up to the end of the month / the 15
shown as 0.
2)
Three pulse inputs are an option. They can be set using the software „Device Monitor".
Page 16 of 37 Article no.: 1080621015
2) Segment test on / off
(all segments triggered
simultaneously)
6) Information message
(alternating binary and
hexadecimal display)
10) Pulse counter 2:
pulse value
alternating with
reading 2)
th of the month (for the semimonthly values) the consumption and date will be
2022_01_18
3) Last reading date
alternating with
heat energy
(cooling energy),
volume,
value tariff register 1,
value tariff register 2
at last reading date. 1)
(If the meter has 3 pulse
inputs, their values
follow. 2) )
7) Tariff register 1:
value alternating with
tariff register no. and
criteria
11) Pulse counter 3:
pulse value
alternating with
reading 2)
Subject to technical change! Errors excepted.
4) Total flow volume in m³
8) Tariff register 2:
value alternating with
tariff register no. and
criteria