Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Spraying Systems Co Manuals
  4. Paint Sprayer
  5. GunJet 60-21580
  6. User manual

Spraying Systems Co GunJet 60-21580 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
60-21580 GunJet
®
Spray Gun
USER GUIDE
MI-60-21580
spray.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the GunJet 60-21580 and is the answer not in the manual?

Questions and answers

Related Manuals for Spraying Systems Co GunJet 60-21580

Summary of Contents for Spraying Systems Co GunJet 60-21580

  • Page 1 60-21580 GunJet ® Spray Gun USER GUIDE MI-60-21580 spray.com...

  • Page 2: Table Of Contents

    CONTENTS CONTENTS ......................2 INTRODUCTION ....................2 WARNINGS & PRECAUTIONS ................3 INSTALLATION ...................... 5 MAINTENANCE ..................... 6 PART LIST ......................10 INTRODUCTION The Model 60-21580 GunJet® Spray Gun is a heavy-duty, impact resistant spray gun with a sturdy nylon handle and trigger guard. The Model 60-21580 GunJet is a high-pressure spray gun which remains responsive and easy to operate even at maximum now and capacity conditions.

  • Page 3: Warnings & Precautions

    3. DO NOT alter equipment in any manner; if repairs are necessary, use only genuine factory repair parts supplied by Spraying Systems Co.® 4. DO NOT exceed maximum operating pressure of the lowest rated accessory item within the spray system, even though some of the accessories have a higher maximum pressure rating.
  • Page 4 8. DO NOT operate a spray gun if there are any leaks from the packings, fittings. hoses. etc. Fluids which are under high pressure can penetrate skin, cloth. etc. and cause serious injury. 9. DO NOT touch any metal parts of the gun or accessories when spraying hot liquids or severe injury can occur.

  • Page 5: Installation

    INSTALLATION 1. Make sure all power is turned off to the pump. Attach GunJet to high-pressure hose with rating to meet or exceed the maximum operating pressure to be used. When spray gun is being used in a possible explosive or flammable environment, a grounded type hose should be used.

  • Page 6: Maintenance

    With proper care, your 60-21580 GunJet will give you reliable service. To maintain this performance, parts should be inspected regularly and replaced when necessary with genuine Spraying Systems Co. parts. (Parts kit AB60- 21580-Kit). DISASSEMBLY PROCEDURE: (See Fig. 1 and Parts List) 1.
  • Page 7 FIGURE 1...
  • Page 8 ASSEMBLY PROCEDURE: (See Figure 1 and Parts List) 1. Secure flat side of PTFE Seat (7) into Main Stem/Seat Holder Sub-Assembly (6, 7, 8) with Pintle (6). Install Stem Guide and Spring (10). Install Seat Retainer (11) onto Main Stem/Seat Holder Sub-Assembly (6, 7, Place Seat Plug Gasket (14) onto...
  • Page 9 Tighten Stem Nut (16) while holding Trigger Guide (22) firmly in place. Place Inlet Body-Trigger Assembly (5) thru (22), in left Hand Housing (2) making sure Roll Pin (20) engaged in hole in left Hand Housing (2). 12. Install lock Spring Ring (24) in left Hand Housing (2). 13.

  • Page 10: Part List

    PART LIST...
  • Page 12 North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000 Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842 www.spray.com MI-60-21580 © Spraying Systems Co. 2019...