Table of Contents
Advertisement
This device emits a complex pulse pattern from the front aperture of the device.
Wavelengths: 635 nm ±5nm, 532 nm ±2nm
Single frame exposure duration: less than 0.4
seconds
4.2.1 External Laser warning information
Location of Laser warning
Positioned on the rear scan
head cover.
4.2.2 Internal Laser warning information
Location of Laser warning
Positioned on the beam cover.
4.2.3 Laser classification
Laser classification
System
Embedded
4.3 Electromagnetic compatibility (EMC)
The P200T is intended for use in the electromagnetic environment as specified in the following tables. The
customer or the user of the device should assure that it is used in such an environment.
4.3.1 Guidance and manufacturer declaration - electromagnetic emissions
TABLE 12: List of electromagnetic emission compliance
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC61000-3-2
Voltage fluctuations/
flicker emissions
IEC61000-3-3
Part Number: G102748/11_ENG
Copyright 2021, Optos plc. All rights reserved.
Warning information
Warning information
VISIBLE AND INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
Classification information
Class 1 as defined by IEC/EN 60825-1
Class 1 as defined by 21 CFR1040.10 and 1040.11.
Class 3B as defined by IEC/EN 60825-1
Class IIIb as defined by 21 CFR1040.10 and 1040.11.
IEC60601
compliance
Electromagnetic environment-guidance
test level
The P200T uses RF energy only for its internal function. Therefore,
Group 1
its RF emissions are very low and are
interference in nearby electronic equipment.
Class B
The P200T is suitable for use in all establishments, including
Class A
domestic establishments and those directly connected to the
public low-voltage power supply network that supplies buildings
used for domestic purposes.
Pst
Dmax
Chapter 4 - Technical Specification
Peak power: 4 mW
Angular period of scan: 70μs rad -1
CLASS 1 LASER DEVICE
CLASS 3B LASER PRODUCT
NOT
likely to cause any
Page 51 of 60
English
Advertisement
Table of Contents
