Table of Contents
Advertisement
Note
User accounts can be made inactive.
3.4.1.2 How to create user accounts on the image server
User management software
System Administrators can use their Windows login details to access the user management application on
the image server.
OptosAdvance
review software
OptosAdvance
user accounts
1. Login to OptosAdvance.
2. Select Settings.
3. Select
User Management >
4. Select Add.
5. Enter the details for the new user and select the privileges to be assigned to them.
6. Select Save.
3.4.1.3 How to change users
To change users, logout of the software and allow the other user to login.
3.4.2 How to change the language on the scan head
You can change the language on the scan head by following these steps:
1. Log in to the scan head using the touch screen.
2. Select
To
admin.
3. Select Language.
4. Select a language from the list.
5. Select
X
to set the language and close the page.
3.4.3 How to change the language displayed in OptosAdvance
All users can change the language displayed in OptosAdvance.
1. Login to the system.
2. Select Settings.
3. Select
Preferences > User
4. Select the
Preferred
5. Select Save.
3.4.4 Storing and archiving images
Image storage is provided by OptosAdvance.
Storage status and archive configurations are accessed by selecting
Your Administrator is responsible for maintaining the storage and archive settings. You can get help storing
and archiving in the
OptosAdvance
page 55.
Part Number: G102748/11_ENG
Copyright 2021, Optos plc. All rights reserved.
be created on the image server.
MUST
Accounts.
Preferences.
Language.
help files or contact your Optos representative, see Contact us on
Chapter 3 - How to...
Settings > Device >
Dicom.
Page 37 of 60
English
Advertisement
Table of Contents
