Table of Contents
Advertisement
No. Name of Part
5
Image server
6
Customer network
Patient
7
environment
Note
The device also includes a user guide, dust cap, power cable and ethernet cable not shown on this
diagram.
A table may also be supplied.
2.6.2 Network specification and characteristics
The following network specification is recommended when connecting the image server to a Wide Area
Network (WAN).
TABLE 1: Network specification
Network specification details
Installation
Connection type
Connection speed
Connection security
Connection ports (defaults)
Unused ports
Part Number: G102748/11_ENG
Copyright 2021, Optos plc. All rights reserved.
Description
Runs the software which transfers patient images from the scan head to the
review client.
Switches, Firewalls, Internet access, Review clients, Virtual image server (if
required).
The image server, switch, browser-based review clients and any Viewing PCs or
monitors must be positioned outside the patient environment; more than 1.5
meters (5 ft) from the scan head.
Scan head and image server PC
LAN TCP/IP ipV4
1 Gbps recommended
All transport HTTPS by default
443, 56620
Locked on scan head and image server PC
Chapter 2 - Introduction
Page 23 of 60
English
Advertisement
Table of Contents
