Table of Contents
Advertisement
Chapter 3 - How to...
3.4.8.3 Cleaning
Wear powder-free gloves at all times when cleaning the device including the scan head and
main mirror. If the gloves become contaminated they must be replaced immediately.
In order to prevent any contamination always clean and disinfect parts of the equipment
which will be in contact with the patient, see Cleaning before each patient on the facing
page.
Adequate cleaning and disinfection is necessary to prevent disease transmission.
Thoroughly clean and disinfect the equipment surfaces that contact the patient and all
equipment surfaces likely to become soiled during use.
Improper cleaning methods or use of inappropriate cleaning and disinfecting agents can
result in the following:
Damaged equipment
l
Poor imaging performance
l
Increased risk of electric shock
l
Always follow the cleaning and disinfecting agents' manufacturer's instructions and
CAUTION
precautions; for storage, method of application, protective gloves, shelf life and disposal to
help assure effective and safe use of the product.
Do
use lint cloths, tissues, or other materials that may create dust, on or near the scan
NOT
head. Always allow cleaned areas to air-dry.
Do
use harsh detergent, abrasive cleaners or solvents that are
NOT
the manufacturer.
Do
expose equipment parts to steam or sterilizers as this will damage the device.
NOT
Do
allow liquids to get into the equipment.
NOT
If you believe cleaning sprays or liquids have got into the equipment, disconnect the power
supply and have the equipment checked by Optos qualified service personnel.
Do
let the cleaning wipes come into contact with the inside of the instrument.
NOT
Do
use the equipment until you have confirmed it is safe to use.
NOT
3.4.8.3.1 General cleaning
Be careful
CAUTION
The equipment should be kept clean and dust free.
Logout, shut down and power off the device before cleaning the outer casing of the scan head.
l
Use a soft, slightly damp cloth to clean the plastic surfaces.
l
Ensure debris does
l
Use a glass-cleaning agent to clean the PC monitor and touch screen.
l
Page 40 of 60
English
to damage the scan head covers when cleaning.
NOT
fall inside the device.
NOT
recommended by
NOT
Part Number: G102748/11_ENG
Copyright 2021, Optos plc. All rights reserved.
Advertisement
Table of Contents
