Advertisement
Part 26 (30pcs)
34.
Locate Parts 26 & 27 (60 Total). Position roof boards onto rafters overhanging equally on front
and rear of Bunkie. Be sure to position roof boards with the smooth face down as these will be seen
from inside. Fasten each board to roof using 4 - 1 1/4" screws per piece into rafters.
Part 32 (10pcs)
35.
Locate Parts 32 (10 Total). Position roof panels onto roof boards overhanging equally on front
and rear of Bunkie. Lift up each panel and caulk the seam where the panels overlap.
Part 34 (4pcs)
36.
Locate Parts 34 (8 Total, 4 per side). Position Foam Enclosures between Metal Roof Panels
and Roof Boards before fastening roof. Secure panels to roof with 30 - 2" Metal Screws and
included 1/4" nut driver. Metal Roof Screws are self tapping, do not overtighten. Position screws so
they go through the peak of roof panels and into Rafters (use rafter ends as a guide). Use 3 rows of
10 screws. Leave the peak unsecured for now. Repeat for opposite side of roof. Complete both
sides.
1-888-658-1658
Part 27 (30pcs)
Roof Panel
Overlap
www.outdoorlivingtoday.com
Page 24
sales@outdoorlivingtoday.com
Advertisement
