Trapped Wood; Transport - P.Lindberg 9043623 Original User Manual

Trapped wood

If the woodchipper has trapped wood, you must first stop the engine and remove the
sparkplug terminal before remedying the problem.
Remove the protective guard on the
rotor shaft.
Tip or remove the spout to empty the
machine on the outlet side.
The rotor can be turned backwards
using a wrench to loosen the stuck
wood.
Use a wooden pin to remove the pieces
that have become stuck to the rotor.
Never use your hands since the blades
and counterknife are very sharp.

Transport

Ensure that the engine has stopped before moving the machine!
P. Lindberg A/S
Tel.: +45 70212626
5
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9043623 EN V2
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk