Trane AFDR Installation Instructions Manual page 56

Installation
Figure 90.
Important: Nameplate values, including Product
Model Number, Product Serial Number,
and Product Sales Order must be set for
the unit as well; refer to
Figure 91.
56
9. Verify all configuration settings and then click the
Figure 92.
10. Tracer TU automatically displays its Binding tab. At
Important:
Figure 93.
Figure 91.
Save. Tracer TU downloads the configuration settings
to the target UC800 controller. A progress dialog box
appears, followed by a resetting target dialog box.
After the configuration has been stored successfully,
click OK to close the dialog box.
this time, all new LLIDs must be bound. If there is a mix
of existing and new LLIDs, Trane recommends that all
existing LLIDs be unbound; then, rebind existing LLIDs
and bind new LLIDs.
For more information about binding LLIDs,
refer to RCDA-SVN001*-EN (Installation
Instructions: Tracer AdaptiView™ RTHD
Rotary Chiller Display Upgrade Kit) or the
original RTHD chiller Installation,
Operation, and Maintenance manual.
AFDR-SVN001D-EN