Preparing Tracer Tu On The Service Computer - Trane AFDR Installation Instructions Manual

Pre-Installation
Preparing Tracer TU on the
Service Computer
After this retrofit, the UC800 controller will communicate
with the TR200 drive via a dedicated Modbus™ Master
connection (independent of the IPC bus). A software
upgrade is required to support this. The following steps
detail how to obtain and install the necessary software
onto the service laptop computer.
1. Tracer™ TU service tool version 9.0.322 or newer is
required to re-program the chiller's UC800. As of this
printing, this version of Tracer TU is available for
download at:
Figure 20.
26
https://home.ingerrand.com/sites/
softwaredownloads/SitePages/TU.aspx
2. If it is not already present, install this version of Tracer
TU on the service computer.
3. After the correct version of Tracer TU is installed on the
service computer, return to the same page (see link
provided in Step 1, p.
Firmware link.
In the screen that appears, click the Latest
Version : Download link to download an EXE file.
Run the application to select specific chiller products
and install the correct software versions for that
product.
26), and click the UC800
AFDR-SVN001D-EN