Table of Contents
Advertisement
Figure 63.
7. Use provided tie wraps to secure the cores to the core
bracket and use tie wraps to keep the power wire
positioned in the center of the cores.
Figure 64.
8. Install ground terminals in the control panel and
connect all ground wires. Drill as needed and use
tapping screws and star washers provided. See
Table 67, p. 48
for location.
AFDR-SVN001D-EN
Figure 65.
9. Align cover over motor terminals and drill four holes
for mounting. Install cover over motor terminals using
four screws (provided); refer to
Figure 66. Cover installation
Wire tap supplied
on all options
Installation
Figure
66.
47
Advertisement
Table of Contents
