Advertisement
1. Outline
The M30290T-80FPD is a converter board for connecting the
emulation probe M30290T-EPB for M16C/26A, 28, 29 Groups
and the compact emulator M30290T2-CPE to a foot pattern for
M16C/28, 29 Group 80-pin 0.5-mm-pitch LQFP (80P6Q-A).
2. Package Components (See Figure 1)
(1) M30290T-80FPD (Base board M30290T-PTCB and
150-mm FFC cable included) 1 pc.
(2) YQPACK080SD (made by Tokyo Eletech Corporation) 1 pc.
(3) NQPACK080SD-ND
(made by Tokyo Eletech Corporation) 1 pc.
(4) YQ-GUIDE (made by Tokyo Eletech Corporation) 4 pcs.
(5) M30290T-80FPD User's Manual (This manual) 1 pc.
3. Specifications
Table 1 Specifications
Applicable package
Insertion/removal
iterations of
connector
4. Usage (See Figure 2)
The M30290T-80FPD can be used for debugging and board
mounted
evaluation
in
NQPACK080SD-ND on the user system.
(1) For debugging
Mount the NQPACK080SD-ND and YQPACK080SD on
the foot pattern of the user system in that order. And fix
them with the YQ-GUIDE's (do not use the screws
included with the YQPACK080SD).
After connecting the M30290T-EPB or M30290T2-CPE
and M30290T-80FPD, connect the M30290T-80FPD to
the YQPACK080SD.
(2) For onboard evaluation
Mount
an
M16C/28,
HQPACK080SD (separately available) in that order on the
NQPACK080SD-ND on the user system. And fix them
using screw included with the HQPACK080SD.
Before using the M30290T-80FPD, be sure to read "7.
Precautions"
on
page
M30290T2-CPE User's Manual.
80P6Q-A
(80-pin 0.5-mm-pitch LQFP)
Between M30290T-80FPD and
YQPACK080SD:
100 times guaranteed
Between M30290T-EPB or
M30290T2-CPE and
M30290T-80FPD:
50 times guaranteed
common
by
mounting
29
Group
MCU
4
and
the
M30290T-EPB
YQPACK080SD
Figure 1 Package components of the M30290T-80FPD
(1) Debugging
M30290T-PTCB
NQPACK080SD-ND *
●: No. 1 pin
*: These products are included with the M30290T-80FPD package.
Figure 2 Usage of the M30290T-80FPD
the
and
or
(2/4)
M30290T-80FPD
NQPACK080SD-ND
YQ-GUIDE (x4)
M30290T-EPB
or
M30290T2-CPE
M30290T-80FPD
(2) On-board evaluation
YQ-GUIDE (x4) *
YQPACK080SD *
80-pin 0.5-mm-pitch
(80P6Q-A) foot pattern
HQPACK080SD
(separately available)
MCU with on-chip
flash memory etc.
Advertisement
