Warnings And Cautions - HP Z Turbo Drive Quad Pro Installation Manual

Warnings and cautions

WARNING!
hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce the risk of
injury from a hot component, enable the surface to cool before touching.
WARNING!
electrical shock hazard. To reduce the risk of injury from electrical shock, do not open any enclosed area
marked with this symbol.
WARNING!
— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
— Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
WARNING!
computer setup, posture, health, and work habits for computer users, and provides important electrical and
mechanical safety information. This guide is located at
CD (if one is included with the product).
WARNING!
lifted by two persons to avoid personal injury due to product weight.
CAUTION:
procedures, be sure you discharge static electricity by briefly touching a grounded metal object.
CAUTION:
precautions while performing the system parts removal and replacement procedures:
— Work on a static-free mat.
— Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your body to
the ground.
— Create a common ground for the equipment you are working on by connecting the static-free mat, static
strap, and peripheral units to that piece of equipment.
NOTE: HP accessories are for use in HP computer products. They have been extensively tested for reliability
and are manufactured to high quality standards.
Installing additional M.2 modules in the HP Z Turbo Drive Quad
Pro
You can install up to four M.2 PCIe SSD modules in this drive. Load the modules from the cover hinge to the
PCIe edge connector in the following order.
TIP: Install all M.2 modules before installing the HP Z Turbo Drive Quad Pro assembly.
2 HP Z Turbo Drive Quad Pro installation
Any surface or area of the equipment marked with this symbol indicates the presence of a
Any surface or area of the equipment marked with this symbol indicates the presence of an
To reduce the risk of electric shock or damage to your equipment:
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
If a product is shipped in packaging marked with this symbol,
Static electricity can damage the electronic components of the computer. Before beginning these
To prevent damage to the computer, observe the following Electrostatic Discharge (ESD)
http://www.hp.com/ergo
, the product must always be
and on the documentation