Bracket Mounting - Simrad GO XSE Series Installation Manual

Bracket mounting

Quick release bracket mounting
The 5" unit can be mounted with the quick release bracket.
1.
Place the bracket in the desired mounting location.
Ú Note:
Ensure that the chosen location has enough height to
accommodate the unit fitted in the bracket, allows tilting of the
unit and connecting cables in the back.
2.
Mark the screw locations using the bracket as a template, and
drill pilot holes.
Ú Note:
Use fasteners suited to the mounting surface material. If
the material is too thin for self-tappers, reinforce it, or mount
the bracket with machine screws and large washers. Use only
304 or 316 stainless steel fasteners.
3.
Screw down the bracket.
4.
Snap the unit to the bracket.
Installation | GO XSE/XSR Installation Manual
17