Table of Contents
Advertisement
Power connections
5" unit power connection
The unit is powered by 12 V DC. It is protected against reverse
polarity, under voltage, and over voltage (for a limited duration).
The plug of the supplied power cable has two discrete cables
exiting from it. The thickest of the two cables provides the
following:
•
Power into the system (Red and Black wires).
•
Controlling power state of the unit (Yellow wire).
2 3
+ _
5
1
Power cable
2
12 V DC positive wire (red) shown with fuse holder fitted
3
12 V DC negative wire (black)
4
Power control wire (yellow)
5
Vessel's 12 V DC supply
6
NMEA 2000 cable and connector
Connect Red to (+) DC using a 3 amp fuse.
Connect Black to (-) DC.
The unit can be powered on and off using the power key on the
front of the case.
Wiring
| GO XSE/XSR Installation Manual
1
4
6
23
Advertisement
Table of Contents
