QUICK START 1CAM MK5
Ethernet Control and Download
Required Components
Camera
SubC Interface Box
Computer
Power cable
TV, DVR or Capture device
Coax or RCA cable
Cat5e Ethernet Cable
Capture device
Updated manuals and software are on the supplied USB stick. They are also
available by emailing
Ethernet
Video cable
Interface
Box
Power
support@subcimaging.com
1.
Install the software following the
2.
Connect the camera to interface box
Connect the interface box to a computer with a Cat5e cable
3.
(note: the camera Ethernet device and computer have to be configured
for static IPv4 for this to work. See instructions in Section 6 )
4.
Connect the interface box to a TV or capture device via video cable
5.
Power on the interface box
6.
To operate the camera follow help tooltips within the software
7.
Once confirmed operational, go to
7
Warning: Observe operating temperatures when running unit in air.
This is an underwater camera.
SubC Smart Camera
Manual, Section 3
SubC Smart Camera
Manual, Section
Need help?
Do you have a question about the 1Cam Mk5 SD and is the answer not in the manual?